OXVA VPrime 2 (Dual Mesh) Replacement Pods
The pod does more work than people give it credit for. It's not just a tank, it's the coil, the airflow and the seal all in one, which means a tired pod doesn't just taste worse, it changes the whole vape. Restocking with the correct resistance, and pairing it with the right style of e-liquid, is the difference between a VPrime 2 that performs like new and one that's coasting on a coil past its best.
These are genuine OXVA VPrime 2 Dual Mesh Replacement Pods, sold as a 2-pack at £6.49 (inc. VAT), available in 0.4Ω or 0.6Ω.
Same coil, same performance, just fresh
The VPrime 2 kit comes with one of each resistance so you can compare them, but once you've settled on a favourite, you'll want spares of that one specifically. These replacement pods use the exact UniTech 3.0 dual mesh coil the kit ships with, so there's no compromise in flavour or vapour production between the original pods and a replacement pack, and no need to relearn your e-liquid pairing each time you swap one in.
Key Features
UniTech 3.0 dual mesh coils. Dual mesh construction heats e-liquid more evenly than a single mesh coil, which means a fuller flavour hit from the first puff. OXVA states this design delivers up to double the flavour and lifespan of a standard single mesh coil.
Direct fit for the VPrime 2. No adapters or workarounds, these pods click straight into the kit's pod bay using the same connection and seal as the originals.
0.4Ω or 0.6Ω, sold separately. Restock whichever resistance you're getting through, the tighter 0.6Ω for nic salts, or the more open 0.4Ω for freebase and shortfill e-liquid.
2ml capacity, UK TPD-compliant. No workarounds needed, this is the maximum legal capacity for nicotine e-liquid in the UK.
Boost mode compatible. Switching to Boost fires both mesh elements in the coil together, which effectively lowers the pod's working resistance (0.4Ω behaves closer to 0.2Ω, 0.6Ω closer to 0.3Ω) for a noticeably stronger hit and thicker vapour.
Improved leak resistance. Carries the same upgraded seal as the pods supplied with the kit, built to reduce the leaking older pod designs were prone to.
Simple refill. Side or top fill port with a silicone bung, quick to top up and reseals cleanly between fills.
Full Specifications
- Pack size: 2 pods per pack
- Compatible device: OXVA VPrime 2 Pod Kit only
- Resistance options: 0.4Ω or 0.6Ω (sold as separate variants)
- Coil type: UniTech 3.0 dual mesh
- Pod capacity: 2ml per pod (UK TPD-compliant)
- 0.4Ω recommended wattage: 28W to 38W (50/50 or 70/30 e-liquid recommended)
- 0.6Ω recommended wattage: 20W to 25W (50/50 e-liquid recommended)
- Fill style: Side or top fill port with silicone bung
- Boost mode: Supported, fires both mesh coil elements together
Dimensions and Weight
OXVA hasn't published separate dimensions or a weight for the pod cartridge on its own, which is normal for accessory pods, they're sized purely to slot into the VPrime 2's pod bay, so there's no separate footprint to plan around. For reference, the VPrime 2 device itself measures 11.3 cm (4.45 in) tall, 4.1 cm (1.62 in) wide and 2.8 cm (1.09 in) deep, and weighs 150 g (0.33 lb), and the fitted pod sits flush within that.
What's in the Pack
- 2x OXVA VPrime 2 Dual Mesh Pods, matched resistance (0.4Ω or 0.6Ω, whichever you order)
These come empty, so have your e-liquid of choice ready, see our pairing guide below.
Compatibility Guide
Built specifically for the OXVA VPrime 2 Pod Kit, these pods aren't interchangeable with anything else in OXVA's range or any other manufacturer's pod system.
Compatible device: OXVA VPrime 2 Pod Kit only.
Compatible e-liquids: Both nicotine salt and standard freebase or shortfill e-liquids work well, which suits best depends on the resistance you've chosen, covered in full below.
Recommended E-Liquids
For the 0.6Ω pod (tighter, mouth-to-lung draw): nic salts are the better match, the tighter draw and lower wattage suit the smoother throat hit nic salt formulations are designed to give at higher strengths.
- VSAVI Nic Salts 20mg - 10ml
- VSAVI Nic Salts 20mg - 30ml
- Hayati Pro Max Nic Salts
- OXVA Ox Passion Nic Salt range, formulated by OXVA specifically around their own pod coils
- Full range: Nic Salts at Pure E-Liquids
For the 0.4Ω pod (looser, more direct-lung draw): step up to a 50/50 or higher-VG shortfill for thicker vapour and a bigger flavour hit at lower nicotine strengths.
Coil and Pod Guide
Working out which resistance to reorder. The resistance is printed on the pod itself, check the one currently fitted if you're not sure. The 0.6Ω suits a tighter, cigarette-like draw with nic salts, the 0.4Ω suits a more open draw with bigger vapour on freebase or shortfill.
Pod Lifespan. OXVA rates the UniTech 3.0 dual mesh coil at up to double the lifespan of a standard single mesh coil, though it doesn't publish an exact puff count. As a general guide rather than an OXVA figure, expect somewhere between 200 and 300 puffs of total coil life per pod, that's across several refills of the 2ml tank rather than from a single fill, before flavour starts to noticeably drop off, though this varies with wattage, e-liquid VG/PG ratio and how often you're vaping. A burnt or muted taste, a gurgling sound, or visibly darkened e-liquid in the pod are the usual signs it's time to swap.
Fitting a new pod. Remove the old one, fill the new pod through its side or top fill port, leave it five to ten minutes to let the wicking material saturate, then click it into place. Vaping too soon after filling is the most common cause of a dry, burnt first hit.
Wattage matters. Keep the device's output within the pod's recommended range, pushing a 0.6Ω pod up towards 38W will burn through the coil faster and can turn clean flavour into a burnt one within days.
Usage Advice
Always prime a new pod, five to ten minutes filled and resting before your first draw is enough for the coil to saturate properly.
Top up little and often rather than filling to the very top in one go, e-liquid needs room to move inside the pod as you vape.
If you're switching e-liquid flavours or brands, it's worth fitting a fresh pod first, residual flavour in a used coil can affect the taste of a new juice for the first few fills.
Keep spare pods in their packaging, somewhere cool and out of direct sunlight, until you're ready to fill and fit them.
Frequently Asked Questions
Which resistance should I buy for the VPrime 2?
Check the pod currently fitted, the resistance is printed on it. If you're choosing between them, 0.6Ω suits nic salts and a tighter draw, 0.4Ω suits freebase or shortfill and a more open draw with bigger vapour.
Can I use shortfill e-liquid in these pods?
Yes, on the 0.4Ω pod. Add a nicotine shot to bring a 0mg shortfill up to your preferred strength, the 0.4Ω pod's higher wattage range is designed for exactly this style of e-liquid.
Can I use nic salts in the 0.4Ω pod?
You can, but it's not the ideal pairing, nic salts are formulated for lower-wattage, tighter-draw setups, so they'll taste smoothest in the 0.6Ω pod.
Do these pods come filled with e-liquid?
No, they're sold empty, fill them with your own e-liquid before fitting.
How many pods are in a pack?
Two, both the same resistance, either 0.4Ω or 0.6Ω depending on which variant you order.
How long does one pod last?
Roughly 200 to 300 puffs as a general guide, depending on your wattage, e-liquid and how often you vape.
How do I know when to change the pod?
A burnt or flat taste, a crackling or gurgling sound, or visibly darker e-liquid in the pod window are the usual signs.
Do these pods fit any other OXVA device?
No, they're built specifically for the VPrime 2 Pod Kit and won't fit the original VPrime, the Xlim range, or any other pod system.
What's the maximum nicotine strength I can use?
20mg (2%) is the legal maximum for e-liquid sold in the UK, and also a sensible ceiling for comfortable vaping on either pod.
Does Boost mode work with these pods?
Yes, Boost mode fires both mesh elements in the coil together for a stronger hit and denser vapour than the standard setting.
Will thicker, high-VG e-liquid work in these pods?
Yes, particularly in the 0.4Ω pod, which is built for that style of juice across its 28W to 38W range. The 0.6Ω pod prefers thinner, higher-PG or 50/50 liquids.
Do these pods leak?
They use the same upgraded seal as the pods supplied with the kit, designed to reduce leaking, though keeping the device upright and not overfilling will help avoid it with any pod system.
Can I order one of each resistance in a single pack?
No, each pack is a single resistance, add both variants to your basket separately if you want spares of each.
Will these fit the original OXVA VPrime kit?
No, the VPrime 2 uses a new Dual Mesh pod design that isn't interchangeable with pods made for the first-generation VPrime.
Sources
- OXVA VPrime 2 official product page, for the UniTech 3.0 dual mesh coil flavour and lifespan claims referenced above.
