The Zenith atomizer is a collaboration between Phil Busardo, Dimitris Agrafiotis, and Innokin. The goal was to create an easy and intuitive to use mouth to lung (MTL) replaceable coil-head atomizer.
The Zenith will be available in both 4ml and 2ml TPD compliant versions.
The Zenith features an easy top fill twist design that will automatically shut off the liquid flow when filling in order to prevent flooding and gurgling, an adjustable airflow, and an easy and clean method to replace the coil.
The tank comes with two different coils to tailor your vaping experience.
– One 1.6 Ohm Kanthal coil for a cooler vape at lower wattages.
– One .8 Ohm Kanthal coil for a slightly warmer vape and slightly higher wattages.
There is also a QR code on the box that will direct you to tutorial videos that will help you in filling, cleaning, replacing the coil, and working with the tank in general.
Beware of Counterfeit Innokin Products
Coupled with the hi-tech 22mm Innokin Axiom M21 tank, this device creates an excellent vape mod that is capable of producing maximum flavour and vapour for those new to vaping or advanced vapers. The Axiom tank is top filling with adjustable bottom airflow and is very low profile.
The Innokin Kroma-A Vape System is powered by the smooth precision of 75 Watt Aethon Temperature Control Chipset (SS316L, Ni-200, Titanium) which includes technology to avoid dry hits. The new standard flush 510 connector now facilitates a full range of alternative tanks and atomizers up to 24mm diameter. The high quality bright OLED clearly displays all important information and the power and ‘+’ – ‘-‘ adjustment buttons raise or lower temperature or watts in .5 increments.
This iTaste Kroma-A Axiom starter kit uses a powerful internal battery which can be recharged using the USB connection for operation and has the great safety features as in all Innokin products.
iTaste Kroma A Advanced Features
The iTaste Kroma A comes with many inbuilt advanced features including "Pre-boost" to pre-heat the coil to the desired temperature, puff counter, integrated cut-off safety including over-discharges auto power off, screen orientation, temperature and wattage memory settings, check atomizer feature. Other features include Stainless Steel TC mode, Nickel (Ni-200) and Titanium (Ti) modes and coil calibration.
iTaste Kroma A Contents:
1 x Innokin Axiom M21 tank
1 x Innokin Kroma-A Mod
1 x Axiom 0.5Ω Coil (Pre-Installed)
1 x Axiom 0.65Ω Coil
1 x Spare Glass
1 x Vape Band
1 x Spare O-Ring Set
1 x Micro USB cable
1 x User manual
Innokin iTaste Kroma Additional Features:
- TC atomizer resistance range: Ni 0.1Ω to 0.2Ω, Ti 0.1Ω to 0.5Ω, SS 0.2Ω to 1.0Ω,
- Screen: OLED display on side of mod
- USB charge port on front of mod
- Comes with 15 sec cut-off, low volts, short circuit & overheat protection
- Has built-in puff counter
- Easy to use vaping kit with advanced features
- Fashionable neat design
- Available in Blue, Black, Red, White.
Innokin iTaste Kroma-A Atomizer Tank Features:
- Easy top-fill twist design that will automatically shut off the liquid flow when filling in order to prevent flooding
- Easy coil replacement
- 2 different coils included in the pack (1.6Ohm Kanthal & 0.8Ohm Kanthal)
Leak Proofing - Leak Free Vaping
Your Innokin Zenith device is manufactured with precision so will not leak providing you use the product and parts correctly. Where any leaks have occurred, we have solved almost all by taking the following steps.
- When using the tank for the first time ensure all the parts of your tank are tightened properly, this involves finger tightening then an extra 1/16th turn
- Ensure the O-ring seals are correctly in place
- Make sure the coil in the tank is finger tightening then an extra 1/16th turn
- When cleaning or replacing the coil carry out the above procedures.
- Ensure you have the correct temperature/power settings for your particular device. Coils for example have ratings and should be kept within maximum and minimum recommended settings. Too high and your device will pop and crackle which may cause spots of e liquid to escape via the air-intake.
Where product has been returned, we have found that TIGHTENING the PIECES properly resolves any leak issue.
Vaping with the Kroma A
First things first - this is a sub ohm device, generally for safer vaping use only 0.3 or 0.6 mg strength nicotine. It is also important to ensure you obtain the correct temperature to vape a given e liquid. Different e liquids have different properties so some need a higher temperature and some a lower temperature. In order to get the "sweet spot" we suggest starting your Kroma at a low setting and increase that in small steps. At some level the vapour will feel warm as you inhale and this is the approximate optimised temperature. You then need to reduce the temperature/wattage 1 step at a time and somewhere around that level you should find your precise "sweet spot. If you like a warmer vapour you can increase the power 1 or 2 watts above this point to see which you prefer and which gives the vapour level and flavour you desire.
If you change e liquids or coil resistance you will then need to repeat the steps above to ensure you are getting the e-liquid at the correct vaping temperature. This product is ideal for power-vapers. For those simply wishing to stop smoking the Kroma vape mod does not present any great advantage over the other much simpler and smaller devices available on the site. Nicotine absorption can be achieved either through high vapour + low strength e-liquid or lower vapour + higher strength e liquid.
iTaste Kroma A Axiom Battery Capacity Monitoring.
An excellent feature of the iTaste Kroma A is the colour coded voltmeter shown on the LED. Know where you stand, how much vape time is left!
Battery capacity is displayed via green yellow and red LED.
Green = Near Full Charge
Yellow = Half Charge
Red = Low Power - charge the iTaste Kroma.
When the Kroma A is on, hold down the power button to activate the indicator. When the iTaste is fully recharged the LED light will power off. Do not charge the Kroma using a car charger.
