Innokin SCION II Tank

Currently Out Of Stock

(3 reviews)
Write a Review
In Stock

SCION II: 

We are excited to introduce the new SCION II, a vape tank that stays true to the original design while offering improvements in areas such as functionality, control, parts interchangeability, aesthetics, and airflow.

Innokin Scion 2 design

The first improvement you’ll notice with the SCION II is that the black SCION Delrin drip tip can now be swapped out for an Innokin wide bore acrylic drip tip, or even the drip tip you’re currently using. This is to help you customize your tank to match your style. The SCION II fits drip tips from some of the most popular 24mm tanks and RDAs on the market.

Scion Plexus Coils

The Scion 2 is compatible with the new Plexus mesh coils which includes a full KAL panel with aligning vent holes. This innovative design ensures maximum flavour at higher wattage and temperature and a corresponding throat hit. Innokin boasts that the resistance stability of the Plexus mesh coils applies a more even current through vape juice which gives far less degradation of the coil. The new Plexus coils are more efficient, vaporise more evenly and last longer.

authentic innokin product licence

Genuine Innokin

There are clones out there so beware, if it is too cheap is it genuine?

Scion II features:

  • 24mm diameter
  • 2ml liquid capacity
  • Adjustable airflow
  • Supports brand new Scion Plexus coils from Innokin
  • Replaceable 810 sized drip tip
  • New and easier to use ‘slide to fill’ filling mechanism

Scion II Box Contents:

  • 1x SCION II Tank with 0.28 Ohm coil pre-installed
  • 1x BVC coil (0.5Ohm)
  • 1x Vape Band
  • 1x Spare Drip Tip
  • 1x Spare O-Ring Set
  • 1x Quick Start Guide

Changing The Innokin Scion Coils

Changing the Scion coils is a relatively easy operation and is best performed with protective gloves to avoid getting nicotine onto you hands. Make sure the tank is empty before attempting to change the coil. Simply unscrew the top mouth-piece part of the tank and remove the glass case, unscrew the old plexus coil and screw in a new coil, make sure the new coil is firmly in place to ensure connectivity. Slide the glass case back into position and replace the mouth-piece, again ensuring it is firmly in place. Scion coils come in the standard coil range but for added flavour and vapour use the Scion Plexus 0.15 Ohm coils

To avoid coil damage make sure you prime the new Scion coil by dripping 3-5 drops of e-Juice onto the cotton held within the coil and leave to soak for at least 5 minutes prior to firing up!

Innokin tanks: Scion II Leak Proofing - Leak Free Vaping

Your Innokin Scion II tank device is manufactured with precision so will not leak providing you use the product and parts correctly. Where any leaks have occurred, we have solved almost all by taking the following steps.

  • When using the SCION II tank for the first time ensure all the parts of your tank are tightened properly, this involves finger tightening then an extra 1/16th turn
  • Ensure the O-ring seals are correctly in place on your Proton or compatible vape mod
  • Make sure the coil in the tank is finger tightening then an extra 1/16th turn
  • When cleaning or replacing the coil carry out the above procedures
  • Ensure you have the correct temperature/power settings for your particular device. Coils for example have ratings and should be kept within maximum and minimum recommended settings. Too high and your device will pop and crackle which may cause spots of e liquid to escape via the air-intake 
  • When not in use close the airflow

Where product has been returned, we have found that TIGHTENING the PIECES properly resolves any leak issue.

 

ABOUT INNOKIN

Founded in 2011 with their main factory of 10,000 square meters in Shenzhen, China and service and repair operations in California, Innokin is one of the leading electronic cigarette and vape device manufacturers in the world.

Innokin is known worldwide for leading brands such a CoolFire, iClear, iTaste, Proton and Lily. Innokin is constantly at the forefront of innovations in electronic cigarette design and function and with over 150 patents. Innokin is accepted as an international pioneer. The advent of the classic CoolFire 4 Plus put them firmly on the map and now with the introduction of the ground-breaking Proton coupled with the Scion 2, Innokin is set to continue as a world leader. The Innokin Proton Scion II is set to be the UK's leading high specification vape mod. Innokin Scion 2 reviews are now on-line and are outstanding!

More Vapour Please!

For those who want more vapour from their Scion 2 than a PG/VG e liquid can offer why not try our VSAVI range of pharmaceutical grade fully lab tested VG e-liquids. VSAVI is 100% pure organic VG e liquid which produces far more vapour than PG e-liquid. Try the sampler pack with your Scion 2 tank to find your favourite flavour or check out the full Innokin Scion 2 Tank review!

/shipping-returns/
  • 5
    Best tank so far!

    Posted by Customer on 26th Mar 2019

    Although I've only been vaping for a couple of years this tank is by far the best I've used, coupled with the plexus coils it's made my vaping a lot better. The best feature of the tank itself is the slide top for refilling as its quick and easy and there is no chance of unscrewing or loosening the tank and disturbing the sealing rubber O-rings. Also I like the way the airflow adjustment clicks and stays in place. And so far I've had no leaks from the tank even when I've had in my work bag. The plexus coils are a lot smoother and the flavour is a lot better.

  • 5
    Quality of the Taste !

    Posted by Anas Andijani on 16th Jul 2018

    price : fair, 7/10 time delivery : very good, 9/10 quality of the product : excellent, 10/10 my feeling : just awesomeness

  • 5
    Quality of the Taste !

    Posted by Anas Andijani on 16th Jul 2018

    price : fair, 7/10 time delivery : very good, 9/10 quality of the product : excellent, 10/10 my feeling : just awesomeness