OXVA Xlim UniTech 3.0 ABT Replacement Pods (3 Pack)
If you vape the OXVA Xlim Pro 4 Pod Kit, these are the pods to keep in your drawer. The Xlim UniTech 3.0 ABT Replacement Pods carry the contacts the Pro 4 needs to run its Anti-Burn Tech, which senses low e-liquid and stops the device firing before the coil can burn.
Every pack holds three 2ml pods in a single resistance: 0.4ohm, 0.6ohm, 0.8ohm or 1.2ohm. That covers everything from a dense, warm RDL vape to a tight MTL draw that pairs perfectly with nic salts.
The pods also slot into other current Xlim kits, where they behave like standard Xlim pods, making them a practical upgrade if you run more than one Xlim device.
Key Features of the OXVA Xlim UniTech 3.0 ABT Pods
- ABT ready: Fit them in the Xlim Pro 4 and the device can detect low liquid, stop output and prompt a refill, helping avoid dry hits.
- UniTech 3.0 design: OXVA's newest pod platform for cleaner flavour, faster priming (around 30 seconds, per OXVA) and better leak protection.
- Choice of four resistances: 0.4ohm, 0.6ohm, 0.8ohm and 1.2ohm, so you can match the pod to your e-liquid and preferred draw.
- 2ml top fill: Fill from the top in seconds. TPD compliant 2ml capacity.
- Clear ABT markings: Four base contacts, an ABT mark and a red silicone mouthpiece ring set them apart from standard Xlim pods.
- Nic salts or freebase: Suitable for both e-liquid types.
- Fits the wider Xlim range: Works in other current Xlim kits as a standard pod.
- 3 pods per pack: Plenty of spares or dedicate one pod to each flavour you rotate.
Specifications
|
Specification |
Detail |
|
Brand |
OXVA |
|
Product |
Xlim UniTech 3.0 ABT Replacement Pods |
|
Pack size |
3 pods per pack (one resistance per pack) |
|
Capacity |
2ml per pod (TPD compliant) |
|
Resistances |
0.4ohm, 0.6ohm, 0.8ohm, 1.2ohm |
|
Coil |
Built-in UniTech 3.0 coil |
|
Fill method |
Top fill |
|
Anti-Burn Tech |
Yes, when used in an ABT device such as the Xlim Pro 4 |
|
Identifying marks |
Four contacts on the base, ABT mark underneath, red silicone ring at the mouthpiece |
|
Priming time |
Around 30 seconds (OXVA figure) |
|
Suitable e-liquids |
Nic salts and freebase e-liquids |
Resistance and Wattage Guide
|
Resistance |
Recommended wattage |
Draw style |
Suggested e-liquid |
|
0.4ohm |
26-30W |
RDL |
50/50 or moderate high-VG freebase, lower nicotine |
|
0.6ohm |
20-25W |
RDL or loose MTL |
50/50 freebase or nic salts up to 10mg |
|
0.8ohm |
12-16W |
MTL |
Nic salts and 50/50 freebase |
|
1.2ohm |
10-12W |
Tight MTL |
Nic salts up to 20mg, higher-PG freebase |
What's in the Box
- 3 x OXVA Xlim UniTech 3.0 ABT Replacement Pods, 2ml, in your chosen resistance
Compatibility
Designed for the OXVA Xlim Pro 4 Pod Kit, the device that activates their Anti-Burn Tech.
|
Device |
Fits |
Anti-Burn Tech (ABT) |
|
Yes |
Yes |
|
|
Yes |
No (standard pod mode) |
|
|
Yes |
No (standard pod mode) |
|
|
Yes |
No (standard pod mode) |
|
|
Yes |
No (standard pod mode) |
Not compatible with OXVA NeXlim or VPrime devices, which use different pods.
Recommended E-Liquids
- 0.8ohm and 1.2ohm pods suit Nic Salts. OXVA's own Ox Passion Nic Salts are a natural match.
- 0.6ohm pods work well with 50/50 PG/VG e-liquids or lower-strength nic salts.
- 0.4ohm pods suit lower-nicotine 50/50 or moderate High VG e-liquids. Avoid very thick 100% VG in 2ml pods.
How to Fill and Fit Your Pod
- Lift the top fill cap and fill to just below the top.
- Close the cap firmly and click the pod into your Xlim device.
- Leave it for around 30 seconds so the coil can soak.
- Set your wattage within the range printed on the pod base.
- In the Xlim Pro 4, top up when the ABT refill alert appears.
Frequently Asked Questions
Do these pods fit the OXVA Xlim Pro 4 Pod Kit?
Yes. They are the dedicated pods for the Xlim Pro 4 and enable its Anti-Burn Tech.
Will they fit my Xlim Pro 3?
Yes. They fit current Xlim kits, including the Pro 3, but ABT only works in an ABT device like the Pro 4.
What is the difference between ABT pods and standard Xlim pods?
ABT pods have extra base contacts that let the Xlim Pro 4 detect the liquid level and stop firing when it runs low. Standard Xlim pods vape the same way but without that protection.
How can I spot an ABT pod?
Look for four contacts on the base, an ABT mark underneath and a red silicone ring at the mouthpiece.
What wattage should I use for each resistance?
0.4ohm: 26-30W. 0.6ohm: 20-25W. 0.8ohm: 12-16W. 1.2ohm: 10-12W.
Which resistance is best for nic salts?
0.8ohm or 1.2ohm, for a tighter MTL draw at lower power.
How many pods do I get?
Three per pack, all in the same resistance.
What is the capacity?
2ml per pod, TPD compliant.
Can I change just the coil?
No, the coil is built in. Replace the whole pod when flavour fades.
How long will a pod last?
It varies with e-liquid and usage. As a general guide, around one to three weeks for most users.
How do I switch ABT on or off?
With an ABT pod in the Xlim Pro 4, press the fire button 8 times quickly.
How long should I prime a new pod?
OXVA quotes around 30 seconds after filling. Leaving it a little longer does no harm.
Sources
ABT, UniTech 3.0 and compatibility details: OXVA Xlim Pro 4 official product page.
