Vapour2 Pro Series 7

The V2 Pro 7 vape pen is a new innovation in vaping, ideal for e-liquid, dry herb and wax oil. Variable temperature settings, larger cartridges and “oven” for dry herb/loose leaf. Magnetic controls and charging.

This 3-in-one Vaporizer is advanced technology. The Series 7 Vaporizer offers compatible cartridges for three, unique mediums: loose leaf/dry herb, e-liquid and wax. Once you’ve filled your chosen cartridge with your preferred medium and inserted it into the cartridge chamber, you can select your temperature setting. If you’re not sure which setting you prefer, the smart technology of Series 7 will recognize the cartridge type and automatically heat to optimum vaporizing temperature.

With the Pro 7 you don't need to buy separate devices for your dry herb/loose leaf and e liquid vaping needs - just buy one - saves money and avoids carrying around two devices! 

Your Series 7 Kit Contains:

• S7 Vaporizer Unit
• S7 magnetic USB charging cord
• Wall adapter (UK or EU)
• S7 E Liquid cartridge
• S7 Loose Leaf cartridge
• Pick and brush used for basic loose leaf cartridge maintenance

Please note: The Pro 7 e liquid operation gives significantly greater vapour production than the majority of vaporizers. It is therefore recommended to use 6 mg strength E-Liquid.

Pro Series 7 in Use: tobacco and dry herb

When starting out with your Pro 7 you need to note the following.

• Dry herb products have varying characteristics and moisture content.
• Vaporizing loose leaf or dry herb does not cause significant vapour - the more you see the less you are absorbing and the more waste there is!
• You need to establish the optimum temperature for your particular dry herb.
• Give it time to work - if there is not significant vapour it does not mean you are not experiencing the active ingredients. Most active ingredients give off a colourless gas when vaporized so will not be visible. 

Start at the lowest temperature and vape for one cycle, then mix the dry herb with the kit provided, set to the next temperature and use for another cycle, repeat for the highest temperature. At some temperature setting your product will work best for you and by using the Pro 7 as above you will determine which setting to use.

There is much online about correct temperature settings, Merck testing suggested 200*C and there are other suggestions. The temperature of the heating element does not equate to the vaporization temperature . There may be a 5-20 degree difference.